Troubleshooting Guide: Resolving Issues with a LG Washer Not Draining Properly
Introduction
At Atlas Appliance Repair, we understand how frustrating it can be when your LG washer refuses to drain properly. This comprehensive troubleshooting guide will help you diagnose and resolve the issue effectively. By following the step-by-step instructions provided below, you can save both time and money by avoiding unnecessary service calls and potentially fix the problem on your own.
Before You Begin
Before diving into the troubleshooting process, it's essential to ensure your safety and the safety of your appliance. Please keep in mind the following precautions:
Safety First: Always unplug your LG washer from the power source before performing any troubleshooting or repair work.
Protective Gear: Wear gloves and safety goggles to prevent injury while working with potentially sharp objects or chemical substances.
Refer to the Manual: Keep your LG washer's user manual handy for specific model-related information and troubleshooting guidance.
Troubleshooting Steps for LG Dryer
Step 1: Check the Power Connection
Ensure that the power cord is correctly plugged into a functional electrical outlet. If not, firmly connect it and try running the washer again.
Step 2: Verify Water Supply
Check if the water supply valves connected to the washer are fully open. If not, turn the valves clockwise until they are fully open.
Step 3: Inspect the Drain Hose
Locate the drain hose at the back of the washer. Ensure that it is not kinked, bent, or blocked in any way. Straighten the hose if necessary.
Step 4: Examine the Drain Filter
LG washers are equipped with a drain filter to prevent debris from clogging the drain pump. To access the filter, follow these steps:
Locate the filter cover on the front lower-left side of the washer.
Using a small screwdriver or a coin, rotate the filter cover counterclockwise to release it.
Place a towel or container underneath the filter to catch any water that may spill out.
Slowly turn the filter counterclockwise and pull it out.
Thoroughly clean the filter under running water, removing any accumulated lint, debris, or foreign objects.
Once cleaned, insert the filter back into its original position, and secure it by rotating it clockwise until it locks into place.
Put the filter cover back on by aligning it with the opening and turning it clockwise to secure it.
Step 5: Check the Drain Pump
If the drain filter appears clean and the issue persists, it's time to inspect the drain pump. Follow these steps to access and clean the drain pump:
Unplug the washer from the power source.
Locate the drain pump filter cover on the front lower-left side of the washer.
Place a towel or container beneath the filter cover to catch any water that may spill out.
Rotate the drain pump filter cover counterclockwise and pull it out.
Remove any debris or foreign objects trapped inside the pump.
After cleaning, reinsert the drain pump filter and secure it by turning it clockwise until it locks into place.
Make sure the filter cover is tightly closed.
Step 6: Verify the Drain Hose Installation
Ensure that the drain hose is correctly installed according to the instructions provided in the user manual. Improper installation can lead to drainage issues.
Step 7: Run a Test Cycle
Plug the washer back into the power source.
Select the appropriate cycle and initiate a test run.
Monitor the washer during the cycle to see if the drainage problem has been resolved.
If you have followed all the troubleshooting steps above and your LG washer still fails to drain properly, it may be necessary to contact a professional technician at Atlas Appliance Repair or the LG customer support team for further assistance.
Remember, proper maintenance and regular cleaning of your LG washer can help prevent future drainage issues. Refer to the user manual for maintenance tips and recommendations specific to your washer model.
Step 8: Check Error Codes
Many modern day washing machines have digital displays that will display Error Codes when something goes wrong. They can be mysterious if you do not know how to interpret them. Don’t worry you can read our DIY blog post on How to interpret error codes here.
DIY LG Washing Machine Videos.
We post videos on how to troubleshoot and repair LG washing Machines. Click here to watch one of our DIY appliance videos on how to put your LG washer into diagnostic mode.
Conclusion
We hope this comprehensive troubleshooting guide has provided you with the necessary steps to resolve the issue of your LG washer not draining correctly. By following these instructions carefully, you can save time and money, and possibly avoid the need for professional assistance. Remember, safety should always be a priority, so ensure you unplug the appliance before performing any maintenance or repair work.
If you require further assistance or have any additional questions, feel free to reach out to our team at 772-238-0207. Our knowledgeable experts are always ready to assist you and provide guidance in resolving any appliance-related issues you may encounter.
Please note that while we strive to provide accurate and up-to-date information, appliances and their troubleshooting processes can vary. Always refer to the official user manual or contact the manufacturer for specific guidance regarding your LG washer model.
Disclaimer: Atlas Appliance Repair is an independent service provider and not affiliated with LG or its subsidiaries. The information provided in this troubleshooting guide is for informational purposes only and should not be considered as professional advice. Use these instructions at your own risk.
This is a comprehensive guide designed to help you troubleshoot and resolve the issue of your LG washer not draining properly. If you live in Martin County, FL or St. Lucie County, FL don’t hesitate to call us for fast LG washer repair service at 772-238-0207
Atlas Appliance Repair services LG washers and dryers in Stuart, Jensen Beach, Palm City, and Port Saint Lucie. Call NOW . Help is just one click away. God bless